Opens in a new tab
+8618024726352
Countertop induction griddle
Countertop induction griddle
Countertop induction griddle 2
Countertop induction griddle
Countertop induction griddle
Countertop induction griddle 2
PRODUCT HIGHLIGHTS

Commercial Induction Griddle for Food Trucks | 5kW

Countertop induction griddle | 5KW

Value of the 220V Front-to-Back 2-Burner Induction Cooktop
Fits Compact Food Truck Counters Without Cutouts
About 550 × 470 mm and sits on a prep counter without a cutout, leaving room for ingredients and tools. Eggs, pancakes, and burger patties share the same plate.
5 kW Output for Peak Food Truck Service
5 kW, 220V single-phase, 22.7A, with 8 output settings. It suits dense production better than 3.5 kW; plan 4 mm² cable, 32A protection, and reserve generator capacity.
No Gas Cylinder—Connect Power and Start Service
Direct induction means no flame or combustion exhaust; the smooth SS304 surface has no grate or burner cap. Ventilation is still required locally.
01 / SPECIFICATIONS

Product Specification

Product Name
Product Model
Power(Kw)
Voltage(V)
Product Size
Product Material
Hs Code
Countertop induction griddle
AT-CTG-003
3.5kw
220V/1Phase
L550*W470+30*H300+100mm
SS304 Stainless Steel
8419810000

3.5KW Electric Requirement

  • Rated at: 15.9A
  • Voltage: 220V (Single-phase)
  • Wire: 2.5mm² Copper Cable
  • Breaker: 20A RCD (Residual Current Device)
Countertop induction griddle
AT-CTG-005
5kw
220V/1Phase
L550*W470+30*H300+100mm
SS304 Stainless Steel
8419810000

5KW Electric Requirement

  • Rated at: 22.7A
  • Voltage: 220V (Single-phase)
  • Wire: 4mm² Copper Cable
  • Breaker: 32A RCD (Residual Current Device)
View All Commercial Induction Griddle
02 / GETTING STARTED

How To Operate This Machine

Step 1
Place your commercial induction cooker in position and connect the power cable based on the required voltage. Make sure all wiring is done correctly before turning on the unit.
Step 2
Once powered on, place your induction cookware on the commercial induction cooker, prepare your ingredients, and get ready to start cooking.
Step 3
Turn the knob from 0 to your desired setting to begin cooking. During the cooking process, simply adjust the knob between levels 1 to 8 to control the heat output to your needs.
Step 4
Once cooking complete,then turn the knob back to 0 to power off the unit. Wipe down and clean the surface of your commercial induction cooker to keep it in top condition.
03 / QUALITY ASSURANCE

Food Truck Induction Griddle Factory Testing: 6 Checks for Output, Cooling, and Electrical Safety

01

Incoming Model and Specification Verification

Before production, the receiving team checks every power module, capacitor, coil, and connector for the food truck griddle against the order bill of materials, supplier label, and component marking. Visually similar parts can carry the wrong model, rated voltage, capacity, or interface, and the mismatch may not appear until final assembly. Inspectors sample critical values such as capacitance and also look for cracks, deformation, and terminal damage. Isolating a suspect lot at this point reduces the risk of a part failing later on generator power or during transport.
02

Solder-Joint Inspection and Aging Tests

Each control board passes through a controlled reflow process, followed by automated optical inspection for missing or shifted parts, solder bridges, and insufficient joints. Road use adds moisture, corrosion, and repeated temperature cycling, so a small board defect can become an intermittent fault away from the workshop. Through-hole parts are wave-soldered and checked for proper hole fill; every board is tested for shorts, opens, component values, and powered function. Boards are also dried before soldering, thermally aged afterward, and exposed to temperature-humidity, salt-spray, and thermal-shock conditions, reducing the chance of a weak joint reaching a mobile kitchen.
03

Coil Winding and Retention Inspection

Factory winding gives each coil its model-specific turn count, spacing, and tension; the coil is then secured, cured, and checked for dimensions and critical electrical values. A coil that fits but shifts or loses insulation can change the heating area once the truck is on the road. During installation, technicians verify orientation, leads, position, insulation, spacers, and retention, and confirm that the coil center aligns with the heating area at the designed distance. Position and fastening are therefore checked against transport vibration, not just against a static bench fit.
04

Cooling Airflow and Fan Testing

Cooling checks begin with the fan’s model, voltage, connector, and dimensions, then move to installation direction, blade clearance, and the exhaust opening. In a compact food truck, wiring or nearby equipment can obstruct airflow more easily than in a full kitchen, and heat then builds up during extended griddle use. The fan is powered and checked for smooth operation, adequate airflow, unusual noise, and visible vibration. Screening the full airflow path—not only whether the blade spins—reduces the risk of cooling problems during a lunch or night-market rush.
05

Grounding and Protective-Function Tests

At final electrical testing, the griddle’s protective earth is traced to its specified grounding point rather than an ordinary structural screw, then insulation and dielectric-withstand tests are performed. Generator power and the confined mobile installation make grounding and protection details more important, not less. Ground continuity, insulation resistance, and leakage current are checked to the model inspection specification, and overheat and dry-run protection are actively triggered to confirm that output is reduced or stopped. This catches a protection fault before the unit is loaded into the truck, rather than after a busy service has begun.
06

Full-Load Operation and Post-Vibration Inspection

Every finished griddle is powered at full load while the team watches power, temperature, fan condition, and any abnormal shutdown. The control is then changed one setting at a time to check the dial and indicator response, followed by a transport-simulation shake test for internal looseness. A unit that passes on the bench can still develop a loose connection after road vibration, so this step is treated as part of release. Any fault is isolated, repaired, and retested; the nameplate is applied only after model, power, voltage, and frequency are reconfirmed against the order.

All results above are from our own factory. See related pages below.

Production Line Center Manufacturing Machines PCB Assembly Center
04 / COOKING APPLICATIONS

Food Truck Induction Griddle Menus: Breakfast, Burgers, and Asian Street Food

Own factory
CE certified
OEM available

Breakfast Food Trucks

A breakfast food truck can prepare eggs, bacon, hash browns, and American-style pancakes during the morning rush, then combine eggs, bacon, and potatoes in breakfast burritos or breakfast boxes. When parked near an office building, station, or neighborhood entrance, the truck can cook in batches to order—savory items first, followed by sweet pancakes.

Burger Food Trucks

A burger food truck can prepare beef patties, grilled cheese, quesadillas, and cheesesteak sandwiches. During lunch or night-market peaks, the same flat plate can continuously cook patties, toast buns, melt cheese, and heat toppings, keeping each ordered combination at one station.

Street-Food Trucks

Asian street-food trucks can prepare teppanyaki-style dishes, scallion pancakes, okonomiyaki, and pan-fried dumplings. A truck can sell scallion pancakes in the morning, switch to meat, seafood, and vegetables at lunch and dinner, and offer dumplings or okonomiyaki in smaller night-market portions, allowing one mobile kitchen to adjust its menu by daypart.
hospital kitchen
FAQs

Frequently Asked Questions

We've gathered the most common questions buyers ask before placing their first order — browse through and find the answers that matter most to you.

Yes, it can be used inside a food truck. Induction produces no open flame or gas-combustion exhaust, which fits the confined air and fire conditions of a mobile kitchen. The operating boundary is straightforward: cooking smoke and grease-laden vapor still need to be exhausted as local rules require, and the intake and exhaust openings must stay clear.

Yes, but only if the generator is sized for the total electrical load. The 5 kW model uses 220V single-phase power and draws about 22.7A, so the circuit should be planned with 4 mm² copper cable and 32A protection. In a food truck, the generator also has to cover refrigeration, lighting, fans, and other equipment at the same time; otherwise peak output can overtax the supply.

The griddle covers breakfast, burgers, and Asian street food in one mobile station. Breakfast can include eggs, bacon, hash browns, and American-style pancakes; lunch and dinner can include burger patties, grilled cheese, and quesadillas. For night-market menus, the same plate handles teppanyaki-style dishes, scallion pancakes, okonomiyaki, and pan-fried dumplings. The menu decision comes down to whether each daypart’s items can be cooked in controlled batches on one surface.

Yes. The smooth stainless steel surface has no grate or burner cap, so it can be scraped and wiped after cooling. (That fits a food truck, where quick turnaround and limited water matter.) Avoid cold-water shock, and keep the lower cooling openings clear.

Yes, branding and voltage can be tailored to the project. The food truck griddle supports OEM branding, and 208V, 240V, 380V, and 415V versions can be evaluated. Because the electrical configuration affects the whole truck, confirm the destination market, phase, plug, certification, and delivery requirements before ordering.

——07 / Factory quote & RFQ

Partner with a Trusted Commercial Induction Cooker Manufacturer

Whether you need wholesale commercial induction cookers, an OEM product line or a commercial kitchen project configuration, send a focused commercial brief. An ATRX team member can review the product, power, certification and customization requirements before quotation.
Useful information to include: Target country · Product category · Application · Voltage / phase · Estimated quantity · Required certifications · OEM / branding needs

learn more

Please let us know the products you want to know and the information you need to know, and we will contact you as soon as possible.