Floor induction large wok cooker 3
Floor induction large wok cooker 2
Floor induction large wok cooker 1
Floor induction large wok cooker 3
Floor induction large wok cooker 2
Floor induction large wok cooker 1
—— PRODUCT HIGHLIGHTS

Floor Commercial Induction Large Wok Cooker | 25KW

This 25kW commercial induction wok cooker meets IPX4 ingress protection standards. It blocks water splashes from every angle, keeping internal electronics safe even in the wettest, greasiest professional kitchen environments.
The IGBT module, control board, and all wiring sit inside a fully enclosed stainless steel housing. This moisture-sealed design stops oil mist, steam, and spilled liquids from reaching any circuit—eliminating the short-circuit risk common in non-waterproof induction wok stoves.
Staff can wipe down or gently spray this floor-standing induction wok range right after service. The waterproof control panel and sealed cable entries handle routine wet cleaning without risking electrical damage—keeping your kitchen hygiene-compliant with zero downtime.
Full 304 stainless steel construction plus water-resistant sealing at every joint fight off rust and oxidation from daily steam exposure. This industrial wok station stays structurally sound and electrically safe through years of heavy restaurant use.

Basic Specification

Product Name
Product Model
Power(Kw)
Voltage(V)
Product Size
Product Material
Hs Code
Floor induction large wok cooker
AT-FLWD500-008
8kw
380V/3Phase
L700*W800*H800+400mm
SS304 Stainless Steel
8419810000

8KW Electric Requirement/(18L)-Pot size:500mm

  • Rated at: 12.2A
  • Voltage: 380V (Three-phase)
  • Wire: 2.5mm² Copper Cable
  • Breaker: 16A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD500-010
10kw
380V/3Phase
L700*W800*H800+400mm
SS304 Stainless Steel
8419810000

10KW Electric Requirement/(18L)-Pot size:500mm

  • Rated at: 15.2A
  • Voltage: 380V (Three-phase)
  • Wire: 2.5mm² Copper Cable
  • Breaker: 20A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD600-012
12kw
380V/3Phase
L800*W900*H800+400mm
SS304 Stainless Steel
8419810000

12KW Electric Requirement/(23L)-Pot size:600mm

  • Rated at: 18.2A
  • Voltage: 380V (Three-phase)
  • Wire: 4mm² Copper Cable
  • Breaker: 25A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD700-015
15kw
380V/3Phase
L900*W1000*H800+400mm
SS304 Stainless Steel
8419810000

15KW Electric Requirement/(40L)-Pot size:700mm

  • Rated at: 22.8A
  • Voltage: 380V (Three-phase)
  • Wire: 6mm² Copper Cable
  • Breaker: 32A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD800-020
20kw
380V/3Phase
L1000*W1100*H800+400mm
SS304 Stainless Steel
8419810000

20KW Electric Requirement/(60L)-Pot size:800mm

  • Rated at: 30.4A
  • Voltage: 380V (Three-phase)
  • Wire: 10mm² Copper Cable
  • Breaker: 40A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD900-025
25kw
380V/3Phase
L1100*W1200*H800+400mm
SS304 Stainless Steel
8419810000

25KW Electric Requirement/(80L)-Pot size:900mm

  • Rated at: 38A
  • Voltage: 380V (Three-phase)
  • Wire: 10mm² Copper Cable
  • Breaker: 50A RCD (Residual Current Device)
Floor induction large wok cooker
AT-FLWD1000-030
30kw
380V/3Phase
L1200*W1300*H800+400mm
SS304 Stainless Steel
8419810000

30KW Electric Requirement/(105L)-Pot size:1000mm

  • Rated at: 45.6A
  • Voltage: 380V (Three-phase)
  • Wire: 16mm² Copper Cable
  • Breaker: 63A RCD (Residual Current Device)

How To Operate This Machine

Step 1
Place your commercial induction cooker in position and connect the power cable based on the required voltage. Make sure all wiring is done correctly before turning on the unit.
Step 2
Once powered on, place your induction cookware on the commercial induction cooker, prepare your ingredients, and get ready to start cooking.
Step 3
Turn the knob from 0 to your desired setting to begin cooking. During the cooking process, simply adjust the knob between levels 1 to 8 to control the heat output to your needs.
Step 4
Once cooking complete,then turn the knob back to 0 to power off the unit. Wipe down and clean the surface of your commercial induction cooker to keep it in top condition.

6-Step Quality Checking of this Machine | Every Unit

Every testing machine shown below is physically present in our factory — no fabrication.
PERFORMANCE

Dust-free PCB assembly

  • Every board built in a sealed cleanroom, no dust or grease particles get trapped under components — eliminates 40% short-circuit failures compare to competitors.

Electric Heating Constant Temperature Drying Oven

  • Bakes out all moisture from PCBs before soldering — boards that skip this step blister and crack under high-power heat within months.

Electric Heating Constant Temperature Incubator

  • Every board is heat-aged for hours to force weak solder joints to fail in our lab, not in your kitchen after installation.

Constant Temperature and Humidity Test Chamber

  • Simulates years of steam and humidity from a real commercial kitchen to verify no board corrosion or short circuits develop over time.

Salt Spray Test Chamber

  • Tests every metal part and connector against aggressive corrosive vapor — the same oils, acids, and moisture your cooker faces daily in a commercial kitchen environment.

Thermal Shock Test Chamber

  • Mimics the hundreds of rapid heat-up / cool-down cycles your cooker endures every single day, cracking any weak solder joint before it ever ships.

What Food Can You Cook With It?

High-Heat Stir-Fry


Fried rice, beef chow fun, and vegetable stir-fries need intense wok hei that sends sauces flying. The 25kW output handles the heat while IPX4 splash-proof sealing protects all electronics from constant liquid splatter.

Braised & Slow-Cooked Dishes


Braised pork, curry, and beef stew simmer for hours, producing heavy steam and boil-overs in the 80L wok. The waterproof sealed compartment keeps moisture away from circuits throughout long cooking sessions.

Deep-Fried Foods


Spring rolls, fried chicken, and tempura cause rapid oil-and-water splashback. The IPX4 water-resistant housing on this commercial induction wok range shields every electrical connection from hot grease and liquid contact.

chef cooking on indutcion cooker
FAQs

Frequently Asked Questions

Profile

Most People Curious

We've gathered the most common questions buyers ask before placing their first order — browse through and find the answers that matter most to you.
Submit Your Inquiry
IPX4 is an international standard (IEC 60529) certifying that the equipment resists water splashes from all directions. On a 25kW induction wok stove running 380V three-phase power, this means broth spills, sauce splatter, and cleaning water cannot reach internal electronics, preventing short circuits and keeping the unit safe during daily use.
Yes. Without ingress protection, water or oil entering through unsealed gaps can short-circuit the PCB board and destroy IGBT modules. Repair costs run high, and mid-service breakdowns disrupt kitchen operations. An IPX4-rated splash-proof commercial induction wok cooker avoids these failures entirely.
Absolutely. The IPX4 splash-resistant design allows safe exterior wiping and light water spraying after service. Sealed cable entries and a waterproof control panel protect all circuitry. Just avoid aiming high-pressure jets directly into ventilation openings, since IPX4 covers splashing, not pressurized streams.
Kitchen steam and liquid gradually corrode unprotected circuits, causing failures within 1–2 years. The IPX4-sealed housing on this industrial induction wok station blocks moisture at every entry point, dramatically slowing corrosion and keeping the cooker performing reliably far longer than non-rated alternatives.
IPX4 is the recognized standard for commercial cooking equipment. It covers all realistic kitchen hazards—sauce splatter, boil-overs, steam, and wet cleaning. Higher ratings like IPX7 protect against submersion, which never occurs with a floor-standing wok range. IPX4 delivers the right protection without unnecessary cost.

learn more

Please let us know the products you want to know and the information you need to know, and we will contact you as soon as possible.